LTHF-M High Flow Filter Cartridge

Applications

•Prefiltration for RO and Seawater Desalination
•Power Generation Condensate treatment
•Food & Beverage
•Petrochemicals and Refineries
•Paints and coatings
•Municipal Water

Description
•Unique radial pleated design which can maximum its surface filtration area

•High dirt holding capacity for long service life and lower replacement cost

•Superior filtration area per filter cartridge - up to 18 ㎡

•High flow rate per filter cartridge - up to 113m³/hr (500GPM)

•Convenient handle design for easy change-out

•Nominally retention rate between 1-100µm at 90-95% efficiency

•Absolute retention rate between 1-20µm at 98-99.9% efficienciu

•PP(Polypropylene) materials in compliance with FDA regulations

•Wide chemical compatibility for different applications

Applications

•Prefiltration for RO and Seawater Desalination
•Power Generation Condensate treatment
•Food & Beverage
•Petrochemicals and Refineries
•Paints and coatings
•Municipal Water

Technical Specifications

Size Length 20"(508mm), 40"(1016mm), 60"(1524mm)
OD 6.5inch
Filtration area 18㎡@60inch, 12㎡@40inch
Materials Filter Media PP(Polypropylene)
End caps & Outer cage PP(Polypropylene)
O-ring seal EPDM / Buna-N / Silicone / Viton
Flow rate Size Max flow rate Design Flow rate
60inch 113m³/hr 80m³/hr
40inch 65m³/hr 38m³/hr
Operation conditions Max. Temperature ~80 ℃
Recommended DP for change-out 2.1-2.4bar

Ordering Information

LTHF-M -PP -20 -N -1 -E -D
Product Filter Media Length Filtration Efficiency Removal Rating O-ring seal Outer Cage
LTHF-M High Flow Filter Cartridge PP=Polypropylene

GF=Glass Fiber

20=20inch

30=30inch

40=40inch

60=60inch

N=Nominal A=Absolute(1- 20um) 1=1um

3=3um

5=5um

10=10um

15=15um

20=20um

40=40um

70=70um

100=100um

E=EPDM

V=Viton

S=Silicon

B=Buna-N

D=Double Insert O-ring

S=Single Insert O-ring

error: Content is protected !!