Applications
•Prefiltration for RO and Seawater Desalination
•Power Generation Condensate treatment
•Food & Beverage
•Petrochemicals and Refineries
•Paints and coatings
•Municipal Water
Description
•High dirt holding capacity for long service life and lower replacement cost
•Reduces system footprint & labor-saving & quick change design
•Inner core with high mechanical strength and outer netting for protecting the pleated media
•"M" pleated design enlarge surface filtration area
•PP(Polypropylene) materials in compliance with FDA regulations
•Wide chemical compatibility for different applications
•Prefiltration for RO and Seawater Desalination
•Power Generation Condensate treatment
•Food & Beverage
•Petrochemicals and Refineries
•Paints and coatings
•Municipal Water
| Size | Length | 20"(508mm), 40"(1016mm) | |
| OD | 6.14inch | ||
| Filtration area | 5.3㎡ | ||
| Materials | Filter Media | PP(Polypropylene) | |
| End caps & Outer cage | PP(Polypropylene) | ||
| O-ring seal | EPDM / Buna-N / Silicone / Viton | ||
| Flow rate | Size | Max flow rate | Design Flow rate |
| 40inch | 70m³/hr | 40m³/hr | |
| Operation conditions | Max. Temperature | ~80 ℃ | |
| Recommended DP for change-out | 2.1-2.4bar | ||
| LTHF-E | -P | -PP | -20 | -N | -1 | -E |
| Product | Elements Type | Filter Media | Length | Filtration Efficiency | Removal Rating | O-ring seal |
| LTHF-E High Flow Filter Cartridge | P=Pleated | PP=Polypropylene | 20=20inch
40=40inch |
N=Nominal A=Absolute(1- 20um) | 1=1um
3=3um 5=5um 10=10um 15=15um 20=20um 40=40um 70=70um 100=100um |
E=EPDM
V=Viton S=Silicon B=Buna-N |
